Send data to Tago CORE
Hi, I try to test Tago CORE. On my computer I have Tago CORE in docker container with sqlite. I create new device, copy Device Token and... how I can send data from device to TagoCORE using cURL? I see this video: https://www.youtube.com/watch?v=5QjV3PaLgYc&ab_channel=TagoIO
Middleware Installation
Hello, We have several device types that all communicate via TCP or UDP. I am needing to get the device data into Tago. If I understand correctly, we will be required to use the Middleware software to receive the data from our sensors and to forward it
Firmware for esp8266 connection
Hi everyone, today is a Good day, I share my little and simple project for connecting my Lifely Agrumino Lemon device and the awesome TAGO.IO platform. You can use the code to connect any ESP8266 by editing the datatosend.cpp file and changing the libraries
Problem receiving data on the platform when the sending interval is greater than 50 seconds
I'm trying to send data from an accelerometer sensor with mqtt. The problem is that when I configure it to send data every 1s the system works. If I increase this sending interval, the platform gives an error and does not receive the data. In the first
In Built Parser For Custom Helium Connector
Hi, I am parsing data from my device via Helium and into my bucket on TagoIO but the name of my variables come through as 1, 2, 3, 4 etc. Is there anyway to obtain and edit the parser used for the connector so that I can change the parsed variables are
[Webinar] How to improve data management
Hi all! We recently had a very informative webinar about how to get the most out of your data storage. If you want to learn all the secrets and best practices that we showed in this webinar, you watch it here: We showed how to utilize metadata to store
Storing gateway information from the payload parser
Hello, Is it possible in the payload decoder to take gateway information of each gateway sent from the Network server such as the EUI, RSSI and SNR, and then turn them into arrays. For instance if 2 different gateways have sent the data it looks like
Is there a way to edit deviceParams (or tags) from device parser?
Hi people, I know that for devices you can access its parameters in the parser using const type = device.params.find(param => param.key === "x"); But, is there a way to set the value from the parser itself? Something like device.params.set(key, value);
Cannot read properties of undefined (reading 'payload') -- Helium Integration
I am trying to plot some data that is coming in from a Helium integration. Specifically, this is a GPS tracker. I see the data coming in when using the inspector, but I am getting the error: Cannot read properties of undefined (reading 'payload') 2023-03-08
I reset my Dragino Temp and Humidity device, but it will not show up.
I am having trouble getting my LSN50 Temp/ Humidity sensor to work. it has been 5 months since the last reading. I reset the device, but it still won't register with Tago. I have the same Dragino Gateway connected. If I haven't touched or monitored this
What is the best way to migrate old data to metadata
I have been migrate my devices to optimize data storage using metadata, all not relevant variable I add in metadata. In some cases, some variables is not so much relevant, but we have widgets with this variables, and I have to keep the historic. What
TTN integration
Hi I use Dragino LT22222L connected to TTN. 12 days ago was last time i got data from TTN to Tagoio. Data from /to LT22222l andd TTN are fine. I am trying now to reconnect webhook connection between TTN and Tago. All I get is "Fail to send Webhook- Request".
external mqtt broker
Hi, I have device which communiacate with mqtt broker hosted by device manufacturer. Could I connect Tago directly to non-tago MQTT server? Tago Have mqtt integration, but it works only for device connected with broker mqtt.tago.io ?
Device parameter - config during payload parser
Hi, I know that I can read value of configuration parameters using: const type = device.params.find(param => param.key === "x"); But it is possible to CHANGE value of parameter (at payload parser) and save it? It is important for me, because I must calculate
August Lock Integration
Hello Taggers!!!! Has anyone successfully integrated an August Lock into Tago.io? Wanna talk? Reply any and all!!!!!
Suggested improvement: direct CRa LoRaWAN support
Hello, some time ago I asked for your help with connecting CRa LoRaWAN (https://www.cra.cz/internet-of-things-connecting-to-the-lora-iot-network) network with TagoIO so I could use my GPS tracker Moko. See here: https://help.tago.io/portal/en/community/topic/data-transfer-from-the-cra-lorawan-network-to-tagoio
How publish or suscribe Tago io with arduino ide mqtt librairies
@rony dampied i need to use arduino ide with pubsubclient librairies I use an esp 8266. I never see an arduino sketch with this mqtt to TAGO IO; thanks
Integrating Sensoterra Sensor
Hi everyone, I'm curently trying to integrate a Sensor from the company "Sensoterra" into TagoIO. Unfortunatly, I can't registrate it to my own TTN-account as Sensoterra handles the sensordata themselve. But they offer HTTP push notifications. Therefore
Connecting devices to external brokers
Hi, new user here. Just want to ask if its possible for tago io to connect with external mqtt brokers? From the guides I have gone through its only showing devices connected to the tago's own broker
MQTT data parser
I try to connect my MQTT sensors on tagoio with MQTT WHen I send my packet with simulator, I get Raw payload: [ { "variable": "temperature", "value": 71 } ] [ { "variable": "temperature", "value": 71 } ] WHen I receive My MQTT sensor I get [MQTT] Device
SenseCAP S2103 decoder.
As title, I need a decoder or connector? For the device in the title. I believe TTN and Datacake cater for this device, is it possible for some smart person to get this working on TagoIO?
Device Location
I have stored on some devices the location and it works fine, but on the devices I have it to empty the bucket every 3 month to save data. The problem is every time the bucket gets emptied, the location gets deleted. Is there a way to empty the bucket,
Tektelic Industrial GPS Asset Tracker Decoder
Does anyone have a decoder for the Tektelic Industrial GPS Asset Tracker? I added it by selecting the device in the pre-built Connectors page but it doesn't seem to be decoding the payload automatically like it did with our Digital Matter (Oyster) t
How to parser a raw_payload - http device
Hello guys, I would like to parser my raw_payload below. I have a really difficulty with javascript and I couldn't do the parser correctly. Could someone help me? The property "payload" is the data from a tractor and the others are the data from which
User input data not retained.
Hi We have GPS devices sending location to immutable buckets. We used immutable buckets to keep the cost of data storage down using the retention policy. The problem : The user can on his dashboard set a variable stored on the devices immutable bucket.
Data transfer from the CRa LoRaWAN network to TagoIO
Hello, I would like to ask you for help with setting up data transfer from CRa LoRaWAN network to TagoIO. I use Moko GPS tracker https://www.mokosmart.com/lw001-bg-lorawan-tm-gps-tracker/ I have a payload parser for this tracker that works fine in The
Bucket migration to another Device
Hello! Is there any way to migrate the historic data from a device to another? For example, I have a quantity of data acquired from a device in it bucket. If I change the device due to a hardware problem (damaged device) I can migrate the history of readings
JSON Payload Parser
Hello everyone, I'm trying to configure the payload parser as below: Payload forwarded via HTTP from LoRaWAN Everynet module {"E":34.1,"S":20.0,"V":18.800,"T":1078.300,"BL":3.66,"BC":10.80,"M":14701} Unfortunately my knowledge is still limited in this
Bucket with no data
Hi, I have a problem with bucket. I am using MQTT protocol to send datas to Tago IO and I am receiving this datas in live inspector but this datas is not save in the bucket. I need help to solve this problem.
Get Data from Device
How can I get Today, yesterday and last month (last day) data from device?
Can not get the sensor data to show up on the dashboard.
I am trying to see the sensor data for the air temp hum device. It says it received data 11 minutes ago as seen in this screenshot. I created a widget in a dashboard and noticed that when I tried to input the Variable to use it stated "Auto Complete is
Formula and Tags
Hello, What is the easiest way to use a tag value in a widget's formula feature? Is it possible or i should create a analysis just for that? If yes, do you have any demo? Ideally I want to calculate a new data based on my device raw data and a constant
How do I get sensors to input data more frequently
How do I change the amount of time between data points? I have one sensor that reads once per day. The other one transmits the data once per hour. I would like to change them to once every ten minutes. How would I do this?
Connect Resiot.io to Tago.io
Hello, We have a weather station connected to Resiot.io platform and we are looking for a solution to stream the data to Tago.io to display the result in the dashboard. The image uploaded (connectors.png) shows the type of connectors. Here the documentation
Queclink GT301
Hello, Is it possible to register the Queclink GT301 device on the Tago.io platform? Thanks in advance !!
MQTT
Hello, I have a device, ThinkLite Flair, which is an air quality sensors and I am trying to use mqtt to send data to tago, but the sensor does not have input fields for username and/or password. Any ideas on how I can solve this? Thank you, Tony
Downlink to chirpstack
Hi, can someone help me with the right format to send downlinks to chirpstack? I know that TagoIO doesn’t support downlinks with chirpstack but maybe there is an alternative way to send downlinks anyway with fx. Http? Regards annia
MOKO GPS Tracker LW001 BG PRO Dashboard
Hi, Does anybody have a functional dashboard for this MOKO device? I'm having a bad experience here with this device and all its variables. Tks
Don't connect sp32
I am new to this, and three months ago I designed a dashboard and I have not connected it, today I want to connect it, and it does not pass information from my sp32 to tago, what can I do?
Sample Payload Parser Code (MQTT)
Someone here could you please help me with a sample of payload parser code to extract the value (marked in blue) and put it in the yellow marked variables? The code needs also handle with different topics (e.g. "topic": "unit/bra", "topic": "unit/arg"
Next Page